How to have an even sheen on the surface of your oil painting without using varnish.
To remedy this problem you do what is called “Oiling Out”.
Oiling out will accomplish two things:
- It will make the colors appear more saturated
- Even out the surface shine.
You CAN do the same thing with a coat of varnish. But there are advantages to oiling out vs. Varnish:
- Varnish can be removed, it does not meld with the oil paint as an oiling out would.
- The oil is absorbed into the oil paint itself and becomes part of the whole.
- It can be accomplished as soon as the painting surface is dry to the touch. Whereas a varnish seals the surface in such a way that the painting must be completely dry all the way through, or it can create problems. So unless you paint very thin it can takes months for the painting to dry enough to apply a coat of varnish.
- You can also continue painting over the oiling out layer, where with varnish this is not suggested.
So how do you do it?
- Lint free cloth such as cheesecloth
- 1″ Flat Paintbrush
- Mixture of either oiling mixture: 50% Artist Medium + 50% Mineral Spirits or, 80% Stand Oil + 20% Turpentine.
- Dust off the surface of the painting with a soft lint free cloth
- Apply the oiling mixture generously with the paintbrush, making sure to cover the entire surface of the piece.
- Let it set for 2-3 minutes to allow the oil to absorb a bit.
- Wipe off the excess with a clean soft lint-free cloth (Such as cheesecloth)
- Place the painting in a clean dust free environment to dry, just as you would any oil painting in progress.